Categories

Contact Us

Add: Room 9A,Xinsheng Plaza,Xinluo Road, Jinan,Shandong Province
Tel: +86-531-88821581
Fax: +86-531-88685562
E-mail: sales@chinajtmb.com

Plywood process how to do it

- Sep 05, 2017 -

Logs - cut off - wood section centering and peeling - veneer drying - single plate processing - coating - group embryo - hot pressing - cooling - vertical and horizontal cutting - sanding - inspection points

Plywood is cut from the wood section into a veneer or cut from the wooden side chopped into thin wood, and then made of adhesive glue from the three or more layers of plate-like material, usually with odd-level veneer, and the adjacent layer veneer Of the fiber direction perpendicular to each other.

Plywood is one of the common materials of furniture, is a wood-based panel. A group of veneers are usually made in the direction of the adjacent layers in the direction of the adjacent layers. Generally, the panels and the inner plates are arranged symmetrically on either side of the center or the core. With the veneer after the wood by the direction of criss-cross the composition of the slab, in the heating or no heating under the conditions of suppression. The number of layers is generally odd, and few are even. Vertical and horizontal direction of the physical and mechanical properties of small differences. Commonly used plywood, pallets and so on. Plywood can increase wood utilization and is a major way to save wood. It is also available for aircraft, ships, trains, automobiles, construction and crates.

The usual length and width specifications are: 1220 × 2440mm, while the thickness specifications are generally: 3,5,9,12,15,18 mm and so on.


Related Industry Knowledge

Related Products

  • 15mm Waterproof Poplar Wood Core Formwork Plywood
  • 10mm Pressure Treated Bamboo Woven Plywood Sheets Distributors
  • Outdoor 15mm 4 X8 Gluing Bamboo Plywood Boards
  • 3/4 Inch Phenolic Hardwood Plywood Outdoors
  • Exterior 4 X 8 Hardwood Veneer Plywood Formwork Panels
  • 12mm 4 X 8 Poplar Plywood Sheet