Home > Knowledge > Content

Categories

Contact Us

Add: Room 9A,Xinsheng Plaza,Xinluo Road, Jinan,Shandong Province
Tel: +86-531-88821581
Fax: +86-531-88685562
E-mail: sdjtf@chinajtmb.com

Matters needing attention when using the template

- Jun 22, 2018 -

When using the building template for the first time, the alloy cutting blade with more than 100 teeth and the sawing machine with rails are used for the template cutting.

If you need a building template of different shapes and sizes, use a hand-held electric saw for cutting;

In addition, nails or holes in the template must be placed under the template on the wood side, to prevent the back of the template caused by the hanging scars;

Edges of all factory templates are edge-sealed to reduce moisture penetration. After cutting and punching at the site, all cutting edges and edges of holes should be coated with suitable waterproof paint. Prevent the template from deforming due to water absorption and cracking.

Related Industry Knowledge

Related Products

  • Exterior 4 X 8 Hardwood Veneer Plywood Formwork Panels
  • 4*8 WBP Melamine Poplar Plywood 18mm
  • Shuttering Ply 9mm
  • Black film Faced Plywood for Concrete Shuttering System
  • 12mm 4 X 8 Poplar Plywood Sheet
  • 18mm Waterproof Bamboo Wood Marine Plywood